How to Reset Schlage Keypad Lock Without Programming Code

Have you ever experienced the hassle of misplacing or forgetting the programming code for your Schlage keypad lock? You’re not alone. This article outlines the procedure for resetting your Schlage keypad lock without the programming code, allowing you to use your lock again seamlessly.

Simple Steps to Reset Your Schlage Keypad Lock

Resetting your Schlage keypad lock without the programming code is straightforward. Follow these steps:

Step	Description
Step 1	Remove the inside cover.
Step 2	Disconnect the battery.
Step 3	Press and release the Schlage button.
Step 4	Reconnect the battery within 10 seconds.
Step 5	Press and hold the Schlage button until it’s green and the lock beeps.
Step 6	Enter the default User Codes. If it unlocks, the reset was successful.

Remember, after the reset, change the default code to a personalized number to ensure security.

Resetting Specific Schlage Models

Models: BE365, FE575, FE595, FE695, BE375

For these models, the reset process is as follows:

1. Disconnect the battery.
2. Press and release the Schlage button.
3. Reconnect the battery within 10 seconds. The Schlage button will light green briefly.
4. Press and hold the Schlage button until it lights green and the lock beeps.
5. Enter the default User Codes to verify the reset.

Model: DE265

To reset the DE265 model:

1. Remove one battery.
2. Press and hold the SET button while reinserting the battery.
3. Hold the SET button until a long beep is heard.

Models: BE469 (Schlage Connect) and BE479 (Schlage Sense)

Resetting these models involves:

1. Disconnecting the batteries.
2. Press and hold the Outside Schlage Button.
3. While holding the Outside Schlage Button, reconnect the batteries.
4. Release the Outside Schlage Button. Enter a default access code to verify the reset.

Model: BE468 (Schlage Connect)

To reset the BE468 model:

1. Disconnect your batteries.
2. Press and hold the logo while reconnecting the batteries.
3. Test the lock with one of the default codes.

Models: BE489 and BE499WB (Schlage Encode)

The process for these models is:

1. Remove the battery cover from the inside assembly.
2. Press and hold the black circle reset button until the LED flashes red and then stops (approximately 7 seconds).
3. The LED will light solid blue once the reset is complete.

Changing the Default Schlage Programming Code

After resetting, it’s crucial to change the default programming code. Here’s how:

1. Enter the original programming code (six digits) and wait for three orange lights and beeps.
2. Press the Schlage button, then press the “3” button.
3. Enter the new programming code (six digits) and wait for three orange lights and beeps.
4. Re-enter the new programming code to confirm.
5. Success is indicated by one green light and a long beep.

Final Thoughts on Resetting Your Schlage Keypad Lock

By following these steps, you can reset your Schlage keypad lock without the programming code. Always remember to change the default code to a personalized one for enhanced security. Whether you have a BE365, FE575, DE265, or any other model, these guidelines will help you get your lock back to its factory settings.